Quality and Technology

ENERSOL is committed to achieving the highest standards in laboratory testing equipment and design, laboratory software and data presentation.

To ensure such high standards are maintained, ENERSOL engages in continuing research and product development and is quick to adapt its technology and software to meet any changes required by national and international standards and specifications.

ENERSOL executives Represent Australia on ISO condom and gloves technical committees and participate in Standards Australia’s committees for mechanical contraception and medical gloves. Dr John Gerofi (Managing Director) is also a NATA Technical Assessor.

In addition, ENERSOL participates in regular condom inter-laboratory trials conducted by Family Health International and ENERSOL as well as glove and luer/syringe trials run by ENERSOL. Smaller comparison trials are conducted with friendly laboratories as particular interests arise.

In Australia, ENERSOL is accredited by NATA as complying with the requirements of ISO 17025:2017 and certified by Bureau Veritas as complying with the requirements of ISO 9001:2015. Enersol Australia's certificates can be found here:

Enersol Australia - ISO 17025 certificate Enersol Australia ISO9001 certificate & scope

In Malaysia, ENERSOL is accredited by DSM as complying with the requirements of ISO 17025:2017 and certified by SIRIM as complying with the requirements of ISO 9001:2015. Enersol Malaysia's certificates can be found here:

Enersol Malaysia - ISO 17025 certificate Enersol Malaysia - ISO 9001 certificate & scope

ENERSOL laboratories are accredited for:

Sampling by the methods of ISO 2859

Tests on Male condoms for conformance with ASTM D3492, ISO 4074 (ex. Annex G, which can be subcontracted), ISO 23409, NZS 7106, UNFPA Dry Pack Seal Method, WHO/UNFPA Specifications

Tests on additional lubricants for male rubber latex condoms, effect on condom strength, according to ISO 19671

Tests on Female condoms for conformance with ISO 25841, WHO Female condoms Guidelines 2012

Tests on Examination gloves for conformance with ISO 11193-1, ISO 11193-2, ISO 21171, ASTM D3578, ASTM D5250, ASTM D6124, ASTM D3619, AS/NZS 4011.1, AS/NZS 4011.2, EN 455-1, EN 455-2

Tests on Surgical gloves for conformance with AS/NZS 4179, ASTM D3577, EN 455-1, EN 455-2, ISO 10282, ISO 21171

Tests on Tampons for conformance with AS 2869 (excluding sections 5.4, 7.1 and 8)

Tests on Dams for confomrance with AS 1683.12 and AS/NZS 4592 (excluding Section 4.1)



Small-bore connectors and reservoir connectors for conformance with ISO 80369 and ISO 18250 part standards, using the methods of ISO 80369-20

Tests on Hot Water Bottles for conformance with BS 1970 (excluding ageing of PVC hot water bottle samples), or with the Trade Practices (Consumer Product Safety Standard) hot water bottle regulation 2008

Tests on syringes, Luers and needles for conformance with AS 1600.1, AS 1600.2, ISO 594-1, ISO 594-2, ISO 7886-1 to 4, ISO 7864, ISO 8537

Tests on hyperdermic needles to AS 1946 (excluding section 6)

Tests on IUD to ISO 7439 Clauses 5.2, 5.3, 5.4, 5.5, 7.2, 7.3, 7.4 only

Tests on toys with compliance to Consumer Protection Notice 14:2003

Tests on toys to AS/NZS ISO 8124-1. Contact us for more information on the tests available at Enersol.

Contact Enersol for more information. Testing can be performed at one of Enersol's laboaratories, based on the tests required. Enersol is well situated with its head office and laboratory in Sydney, Australia and its regional office and laboratory in Penang, Malaysia.

Last updated: 19 Feb 2021

CONTACT ENERSOL

Call us..

Sydney (head) office Phone | +61 2 9552 1707

Penang office Phone | +60 4 281 1371


   

Visit us at one of our locations..

Sydney (head) office address
235 Nelson Street, Annandale, NSW 2038 AUSTRALIA
Google Map - Enersol AU

Penang office address
No. 2-2, Lebuh Sungai Pinang 1, Seksyen 8,
Bandar Georgetown, Daerah Timur Laut,
11600 Pulau Pinang, MALAYSIA
Google Map - ENERSOL MY

Send us an E-Mail..

For general enquiries please contact enquiries@enersol.com.au
For Laboratory equipment and testing enquiries please contact
Lisa Henretty or Hung Truong